Авторизация

Забыли пароль?

Коды ошибок hp designjet t1120

CodeDescription
00
YZ part of the System Error Code or Warning
Possible for customer to perform action
Replace
01
YZ part of the System Error Code or Warning
Possible for customer to perform action
Reseat/Reconnect/Clean/Adjust (manually)
01.0:YZ
XX part of the System Error Code or Warning
HCI queue does not end after 2 seconds.
01.1:YZ
XX part of the System Error Code or Warning
NVM backup: not found, read, write or read back error.
01.2:YZ
XX part of the System Error Code or Warning
Print Mech PCA fault or NVM backup failure.
02
YZ part of the System Error Code or Warning
Possible for customer to perform action
Calibrate/Adjust (using automatic process)
02.1:YZ
XX part of the System Error Code or Warning
Encoder seems to be wrong.
02.2:YZ
XX part of the System Error Code or Warning
Problem with the Carriage PCA.
03
YZ part of the System Error Code or Warning
Possible for customer to perform action
Power off and restart the printer
03:YZ
XX part of the System Error Code or Warning
Problem with Power Supply Unit.
04
YZ part of the System Error Code or Warning
Possible for customer to perform action
Upgrade system firmware
05
YZ part of the System Error Code or Warning
Possible for customer to perform action
Upgrade driver or computer software
05.1:YZ
XX part of the System Error Code or Warning
CPU Fan is stopped or burnt.
06
YZ part of the System Error Code or Warning
Possible for customer to perform action
Add accessory
06:YZ
XX part of the System Error Code or Warning
Main NVM failure - not detected, read/write failed or readback error.
07
YZ part of the System Error Code or Warning
Possible for customer to perform action
Escalate
08
YZ part of the System Error Code or Warning
Possible for customer to perform action
Send plot again
08:YZ
XX part of the System Error Code or Warning
Problem with the Front Panel.
09
YZ part of the System Error Code or Warning
Possible for customer to perform action
Wrong part installed
10
YZ part of the System Error Code or Warning
Qualified personnel assistance required
Replace
11
YZ part of the System Error Code or Warning
Qualified personnel assistance required
Reseat/Reconnect/Clean/Adjust (manually)
11:YZ
XX part of the System Error Code or Warning
Trailing Cable does not seem to be detected.
12
YZ part of the System Error Code or Warning
Qualified personnel assistance required
Calibrate/Adjust (using automatic process)
12.n:YZ
XX part of the System Error Code or Warning
Carriage & PCA Main doesn’t detect pens.
13
YZ part of the System Error Code or Warning
Qualified personnel assistance required
Power off
14
YZ part of the System Error Code or Warning
Qualified personnel assistance required
Upgrade system firmware
15
YZ part of the System Error Code or Warning
Qualified personnel assistance required
Upgrade driver or computer software
16
YZ part of the System Error Code or Warning
Qualified personnel assistance required
Add accessory
17
YZ part of the System Error Code or Warning
Qualified personnel assistance required
Escalate
18
YZ part of the System Error Code or Warning
Qualified personnel assistance required
Send plot again
19
YZ part of the System Error Code or Warning
Qualified personnel assistance required
Wrong part installed
21.1:YZ
XX part of the System Error Code or Warning
Service Station servo shutdown.
21:YZ
XX part of the System Error Code or Warning
Fail moving Service Station.
22.0:YZ
XX part of the System Error Code or Warning
ISS Left BPS0 error.(Supplies 0, 1, 2).
22.1:YZ
XX part of the System Error Code or Warning
ISS Left BPS1 error.(Supplies 3, 4, 5).
24:YZ
XX part of the System Error Code or Warning
Ink Setup failure( Ink Delivery System (IDS) Tubes purge failed).
26.n:YZ
XX part of the System Error Code or Warning
Order of Ink Supplies incorrect. (color = n)
27:YZ
XX part of the System Error Code or Warning
An error has occurred in Printhead detection.
29.n:YZ
XX part of the System Error Code or Warning
An error has occurred in Printhead detection.
31:YZ
XX part of the System Error Code or Warning
An error has been detected with the cutter.
38:YZ
XX part of the System Error Code or Warning
An error has been detected with the Media Output Tray.
41.1:YZ
XX part of the System Error Code or Warning
Electrical fault or current limit in Media-Axis Motor
41:YZ
XX part of the System Error Code or Warning
Electrical fault or current limit in Media-Axis Motor.
42:YZ
XX part of the System Error Code or Warning
Electrical fault or current limit in Scan-Axis Motor.
44:YZ
XX part of the System Error Code or Warning
Fan Electrical fault, or not connected
45:YZ
XX part of the System Error Code or Warning
An error with the Rewinder System has been detected
47:YZ
XX part of the System Error Code or Warning
Star wheels motor error
48:YZ
XX part of the System Error Code or Warning
PPS system failure
51:YZ
XX part of the System Error Code or Warning
Window Sensor failure
52:YZ
XX part of the System Error Code or Warning
The printer has detected a problem with the Drop Detector
55:YZ
XX part of the System Error Code or Warning
Problem with the Line Sensor. The printer has detected a failure to access Line Sensor EEPROM).
56:YZ
XX part of the System Error Code or Warning
Drive roller analog encoder sensor fail or calibration failed.
58:YZ
XX part of the System Error Code or Warning
The Line Sensor of the printer is not functioning correctly. Either the Line Sensor shutter has failed to open, there is a failure to communicate with the Line Sensor, the Line Sensor is not calibrated correctly, or the firmware is not compatible with the Line Sensor
61:YZ
XX part of the System Error Code or Warning
The file format is incorrect and the Printer cannot process the job.
62:YZ
XX part of the System Error Code or Warning
PC Interface
63:YZ
XX part of the System Error Code or Warning
Input/Output problem through the Network Card.
64:YZ
XX part of the System Error Code or Warning
Input/Output problem through the USB Port.
65:YZ
XX part of the System Error Code or Warning
Memory Driver Internal I/O error, I/O Socket Manager Internal I/O error.
66:YZ
XX part of the System Error Code or Warning
Cannot print file on current paper type. The paper type has changed since the file was sent, so the file cannot be printed on the paper type currently loaded.
67:YZ
XX part of the System Error Code or Warning
Input/Output problem through a Firewire Port.
68:YZ
XX part of the System Error Code or Warning
Loss of engine counters tracking.
71:19
XX part of the System Error Code or Warning
Default Serial Number found in the main and backup NVM. It seems that both the Print Mech PCA and Hard Disk Drive have been replaced together.
71:YZ
XX part of the System Error Code or Warning
Out of memory failure.
72:YZ
XX part of the System Error Code or Warning
Generic Firmware error.
73:YZ
XX part of the System Error Code or Warning
Servo Error.
74.1:YZ
XX part of the System Error Code or Warning
Error uploading media profile update file.
74:YZ
XX part of the System Error Code or Warning
Error uploading firmware update file.
75.1:YZ
XX part of the System Error Code or Warning
Preventive Maintenance Kit #1 counter active (Scan Axis Components ,Ink Supply Tubes, Trailing Cable, Carriage).
75.2:YZ
XX part of the System Error Code or Warning
Preventive Maintenance Kit #2 counter active.
75.3:YZ
XX part of the System Error Code or Warning
Preventive Maintenance Kit #3 counter active (Cutter Assembly).
75.4:YZ
XX part of the System Error Code or Warning
Preventive Maintenance Kit #4 counter active.
76:YZ
XX part of the System Error Code or Warning
Hard disk drive is full.
77:YZ
XX part of the System Error Code or Warning
Web access application. The web server is not functioning correctly.
78.1:YZ
XX part of the System Error Code or Warning
Media settings area missing in media settings file.
78:YZ
XX part of the System Error Code or Warning
Borderless printing not possible. Setting ignored.
79.1:YZ
XX part of the System Error Code or Warning
Recoverable firmware error that does not stop the printing process.
79:YZ
XX part of the System Error Code or Warning
Generic Firmware error.
81.1:YZ
XX part of the System Error Code or Warning
Problem finding the Drive Roller zero.
81:YZ
XX part of the System Error Code or Warning
Problem with paper advance.
84:YZ
XX part of the System Error Code or Warning
Back tension servo shutdown (roll feeding).
85:YZ
XX part of the System Error Code or Warning
Problem finding the Drive Roller zero.
86:YZ
XX part of the System Error Code or Warning
Possible Paper Jam.
87:YZ
XX part of the System Error Code or Warning
Problem finding the Scan-axis encoder reading.
93:YZ
XX part of the System Error Code or Warning
Unable to pressurize the Ink Delivery System.
94.1:YZ
XX part of the System Error Code or Warning
Profiling algorithm failed.
94:YZ
XX part of the System Error Code or Warning
Color calibration Error.
98:YZ
XX part of the System Error Code or Warning
Automatic backup print mode enabled.
XX.n:YZ.m
Error Codes Format 
• XX: Subsystem or process (2 digits).
• n: Subsystem or process index (if more than one used in the product) – optional. e.g. Identify the Ink Supply (color and number).
• Y: Who should perform the action (1 digit) – (0 for User or 1 for Service Engineer).
• Z: Action to perform (1 digit).
• m: additional actions/information to consider (1 digit) – Optional.


Фотография 1 Фотография 1 Фотография 2 Фотография 3 Фотография 4 Фотография 1 Фотография 2 Фотография 3

Выравнивание по центру

196084, г. Санкт-Петербург, Московский проспект, дом 136 корпус 2 литера А, тел. 8(812) 967-25-21, 8(812) 967-25-31, info@andyshop.ru

Эндишоп.ру - это онлайн магазин доставки по России более 20000 товаров и услуг для обслуживания и бесперебойной работы оргтехники. У нас можно заказать любые расходные материалы, опции, блоки и отдельные запчасти принтеров и картриджей марки: brother, canon, duplo, epson, hp, konica minolta, kyocera mita, lexmark, oki, panasonic, philips, ricoh, samsung, riso, sharp, toshiba, xerox. Срок отправки и поставки большинства товаров и услуг регулируются только выбранной Вами формой оплаты. Мы предлагаем качественные, сертифицированные для России и полностью совместимые аналоги boost, g&g, hi-black, katun, static control, uninet и даем гарантию на все продаваемые нами товары и услуги. Вы всегда можете получить ответ на свой вопрос и больше информации задав вопрос нашему онлайн-консультанту на сайте. Информация, указанная на сайте носит информационный характер и не является публичной офертой, нашей офертой является подтверждение заказа с указанием товара, сроков поставки и его цены.

Создание Интернет-магазина Andyshop.ru - PHPShop. Все права защищены © 2003-2018.