Авторизация

Забыли пароль?

Коды ошибок hp designjet z6100

CodeDescription
00YZ part of the System Error Code or Warning
Possible for customer to perform action
Replace
01YZ part of the System Error Code or Warning
Possible for customer to perform action
Reseat/Reconnect/Clean/Adjust (manually)
01.0XX part of the System Error Code or Warning
Main PCA/Electronics Module
01.1XX part of the System Error Code or Warning
Add-on Electronics Module (Printmech)
01.2XX part of the System Error Code or Warning
ISS Electronics Module
01.3XX part of the System Error Code or Warning
Electronics PCA module of RM2
01.4XX part of the System Error Code or Warning
Electronics PCA module of RM3
02XX part of the System Error Code or Warning
Carriage
02YZ part of the System Error Code or Warning
Possible for customer to perform action
Calibrate/Adjust (using automatic process)
02.1XX part of the System Error Code or Warning
Carriage PCA
03XX part of the System Error Code or Warning
Power Supply Unit
03YZ part of the System Error Code or Warning
Possible for customer to perform action
Power off and restart the printer
04XX part of the System Error Code or Warning
Network Card
04YZ part of the System Error Code or Warning
Possible for customer to perform action
Upgrade system firmware
05XX part of the System Error Code or Warning
Formatter
05YZ part of the System Error Code or Warning
Possible for customer to perform action
Upgrade driver or computer software
05.1XX part of the System Error Code or Warning
Fan of the Formatter
05.2XX part of the System Error Code or Warning
Processor of the Formatter
05.3XX part of the System Error Code or Warning
Memory of the Formatter
06XX part of the System Error Code or Warning
Hard Disk Drive
06YZ part of the System Error Code or Warning
Possible for customer to perform action
Add accessory
07XX part of the System Error Code or Warning
Interconnect PCA
07YZ part of the System Error Code or Warning
Possible for customer to perform action
Escalate
08XX part of the System Error Code or Warning
Front Panel
08YZ part of the System Error Code or Warning
Possible for customer to perform action
Send plot again
09YZ part of the System Error Code or Warning
Possible for customer to perform action
Wrong part installed
10YZ part of the System Error Code or Warning
Qualified personnel assistance required
Replace
11XX part of the System Error Code or Warning
Trailing Cable
11YZ part of the System Error Code or Warning
Qualified personnel assistance required
Reseat/Reconnect/Clean/Adjust (manually)
12YZ part of the System Error Code or Warning
Qualified personnel assistance required
Calibrate/Adjust (using automatic process)
12.nXX part of the System Error Code or Warning
Carriage Flex Circuit n to pens
13YZ part of the System Error Code or Warning
Qualified personnel assistance required
Power off
13.1XX part of the System Error Code or Warning
Cable from cartridge Left ISS PCA
13.2XX part of the System Error Code or Warning
Cable from cartridge Right ISS PCA
14YZ part of the System Error Code or Warning
Qualified personnel assistance required
Upgrade system firmware
15YZ part of the System Error Code or Warning
Qualified personnel assistance required
Upgrade driver or computer software
16YZ part of the System Error Code or WarningYZ part of the System Error Code or Warning
Qualified personnel assistance required
Add accessory
17XX part of the System Error Code or Warning
Harness Main PCA to Printmech PCA
17YZ part of the System Error Code or Warning
Qualified personnel assistance required
Escalate
18YZ part of the System Error Code or Warning
Qualified personnel assistance required
Send plot again
19YZ part of the System Error Code or Warning
Qualified personnel assistance required
Wrong part installed
21XX part of the System Error Code or Warning
Service Station
21.1XX part of the System Error Code or Warning
Primer
22.1XX part of the System Error Code or Warning
Left Ink Supply Station
22.2XX part of the System Error Code or Warning
Left Ink Supply Station
23Pressure System (APS)
24XX part of the System Error Code or Warning
Ink Delivery Tubes
25.1XX part of the System Error Code or Warning
Left Spittoon
25.2XX part of the System Error Code or Warning
Right Spittoon
26nXX part of the System Error Code or Warning
Ink Cartridge (color n)
27nXX part of the System Error Code or Warning
Printhead (color n)
28nXX part of the System Error Code or Warning
Setup Printhead (color n)
29nXX part of the System Error Code or Warning
Printhead Cleaner (color n)
31XX part of the System Error Code or Warning
Cutter
32XX part of the System Error Code or Warning
Starwheel Lifter
33XX part of the System Error Code or Warning
Rear Tray
34XX part of the System Error Code or Warning
Dryer/Blower
35XX part of the System Error Code or Warning
Cleanout Assembly
36XX part of the System Error Code or Warning
Duplexer
37XX part of the System Error Code or Warning
ARSS/Rollfeed
38XX part of the System Error Code or Warning
Output Tray
39XX part of the System Error Code or Warning
Paper Loading Failure
41XX part of the System Error Code or Warning
Paper-Axis Motor
41.1XX part of the System Error Code or Warning
Roll Module 1 Feed Advance Motor
41.2XX part of the System Error Code or Warning
Roll Module 2 Feed Advance Motor
41.3XX part of the System Error Code or Warning
Roll Module 3 Feed Advance Motor
42XX part of the System Error Code or Warning
Scan-Axis Motor
43XX part of the System Error Code or Warning
Vacuum Fan
44XX part of the System Error Code or Warning
Aerosol Fan
45XX part of the System Error Code or Warning
Back Tension Motor
46XX part of the System Error Code or Warning
PRS Mechanism
47XX part of the System Error Code or Warning
Starwheel Lifter
48XX part of the System Error Code or Warning
PPS Mechanism
51XX part of the System Error Code or Warning
Window/Door Sensor
51.1XX part of the System Error Code or Warning
Service Station Door Sensor
51.2XX part of the System Error Code or Warning
Stacker Detector Sensor
51.3XX part of the System Error Code or Warning
Left Sensor Draw Roll 1
51.4XX part of the System Error Code or Warning
Left Sensor Draw Roll 2
51.5XX part of the System Error Code or Warning
Right Sensor Draw Roll 1
51.6Right Sensor Draw Roll 2
51.7XX part of the System Error Code or Warning
Left Sensor Draw Roll 3
51.8XX part of the System Error Code or Warning
Right Sensor Draw Roll 3
52XX part of the System Error Code or Warning
Drop Detector
53XX part of the System Error Code or Warning
Media Sensor
53.1XX part of the System Error Code or Warning
Back Channel Media Sensor
53.2XX part of the System Error Code or Warning
Single Sheet Media Sensor
53.3XX part of the System Error Code or Warning
Media Standby Sensor Roll Module 1
53.4XX part of the System Error Code or Warning
Media Standby Sensor Roll Module 2
53.5XX part of the System Error Code or Warning
Media Standby Sensor Roll Module 3
54XX part of the System Error Code or Warning
Pinch Lever Sensor
54.1XX part of the System Error Code or Warning
Pinch Lever Sensor Roll 1
54.2XX part of the System Error Code or Warning
Pinch Lever Sensor Roll 2
54.3XX part of the System Error Code or Warning
Pinch Lever Sensor Roll 3
55XX part of the System Error Code or Warning
Line Sensor
56XX part of the System Error Code or Warning
Drive Roller Analog Encoder Sensor
56.1XX part of the System Error Code or Warning
Back Tension Arm Encoder Kit Module 1
56.2XX part of the System Error Code or Warning
Back Tension Arm Encoder Kit Module 2
56.3XX part of the System Error Code or Warning
Back Tension Arm Encoder Kit Module 3
57XX part of the System Error Code or Warning
Ink Leak Detector
58XX part of the System Error Code or Warning
Color Sensor (SOL)
59XX part of the System Error Code or Warning
Media Type Sensor
61XX part of the System Error Code or Warning
Language Interpreting
61.1XX part of the System Error Code or Warning
PS Fonts Missing
61.2XX part of the System Error Code or Warning
File with Passwords cannot be Printed
62XX part of the System Error Code or Warning
Input/Output through Parallel Port
63XX part of the System Error Code or Warning
Input/Output through LAN Card
63.0XX part of the System Error Code or Warning
Input/Output through Integrated LAN Card
63.1XX part of the System Error Code or Warning
Input/Output through add-on JetDirect LAN Card
63.2XX part of the System Error Code or Warning
Input/Output through add-on Gigabit LAN Card
64XX part of the System Error Code or Warning
Input/Output through USB Port
65XX part of the System Error Code or Warning
Input/Output (not know what port)
66XX part of the System Error Code or Warning
Print Job Configuration
67XX part of the System Error Code or Warning
Input/Output through FireWire Port
68XX part of the System Error Code or Warning
Loss of Engine Counters Tracking
71XX part of the System Error Code or Warning
Memory Management
72XX part of the System Error Code or Warning
Generic Firmware
73XX part of the System Error Code or Warning
Motor Control Functions
74XX part of the System Error Code or Warning
Firmware Upgrade
74.1XX part of the System Error Code or Warning
Media Profile Upgrade
75XX part of the System Error Code or Warning
Preventive Maintenance
75.1XX part of the System Error Code or Warning
Preventive Maintenance Kit #1
75.2XX part of the System Error Code or Warning
Preventive Maintenance Kit #2
76XX part of the System Error Code or Warning
Disk Full
77XX part of the System Error Code or Warning
WebAccess Application
79XX part of the System Error Code or Warning
Assertion (Uncontrollable Firmware Error)
79.1XX part of the System Error Code or Warning
Warning (Uncontrollable Recoverable Firmware Error)
81XX part of the System Error Code or Warning
Media Advance
81.3XX part of the System Error Code or Warning
Media Advance Stacker Motor
81.4XX part of the System Error Code or Warning
Media Advance Stacker Paper Jam Sensor
82XX part of the System Error Code or Warning
Media Cut
83XX part of the System Error Code or Warning
Single-Sheet Feeding
84XX part of the System Error Code or Warning
Roll Feeding
84.1XX part of the System Error Code or Warning
Roll Module 1 Feeding
84.2XX part of the System Error Code or Warning
Roll Module 2 Feeding
84.3XX part of the System Error Code or Warning
Roll Module 3 Feeding
85XX part of the System Error Code or Warning
Media-Axis Encoder Reading
86XX part of the System Error Code or Warning
Carriage Movement
87XX part of the System Error Code or Warning
Scan-Axis Encoder Reading
91XX part of the System Error Code or Warning
Printhead Firing
92XX part of the System Error Code or Warning
Servicing
93XX part of the System Error Code or Warning
Ink Pumping
94XX part of the System Error Code or Warning
Color Calibration
94.1XX part of the System Error Code or Warning
Profiler
95XX part of the System Error Code or Warning
Printhead Alignment
96XX part of the System Error Code or Warning
Image Quality Troubleshooting
97XX part of the System Error Code or Warning
Paper Advance Calibration
98XX part of the System Error Code or Warning
Automatic Backup Printmode Enabled
99XX part of the System Error Code or Warning
Media Loading Failure
XX.n:YZ.mError Codes Format:
• XX: Subsystem or process (2 digits).
• n: Subsystem or process index (if more than one used in the product) – optional. e.g. Identify the Ink Supply (color and number).
• Y: Who should perform the action (1 digit) – (0 for User or 1 for Service Engineer).
• Z: Action to perform (1 digit).
• m: additional actions/information to consider (1 digit) – Optional.



Фотография 1 Фотография 1 Фотография 2 Фотография 3 Фотография 4 Фотография 1 Фотография 2 Фотография 3

Выравнивание по центру

196084, г. Санкт-Петербург, Московский проспект, дом 136 корпус 2 литера А, тел. 8(812) 967-25-21, 8(812) 967-25-31, info@andyshop.ru

Эндишоп.ру - это онлайн магазин доставки по России более 20000 товаров и услуг для обслуживания и бесперебойной работы оргтехники. У нас можно заказать любые расходные материалы, опции, блоки и отдельные запчасти принтеров и картриджей марки: brother, canon, duplo, epson, hp, konica minolta, kyocera mita, lexmark, oki, panasonic, philips, ricoh, samsung, riso, sharp, toshiba, xerox. Срок отправки и поставки большинства товаров и услуг регулируются только выбранной Вами формой оплаты. Мы предлагаем качественные, сертифицированные для России и полностью совместимые аналоги boost, g&g, hi-black, katun, static control, uninet и даем гарантию на все продаваемые нами товары и услуги. Вы всегда можете получить ответ на свой вопрос и больше информации задав вопрос нашему онлайн-консультанту на сайте. Информация, указанная на сайте носит информационный характер и не является публичной офертой, нашей офертой является подтверждение заказа с указанием товара, сроков поставки и его цены.

Создание Интернет-магазина Andyshop.ru - PHPShop. Все права защищены © 2003-2018.